:orphan:

.. _blom_standard_out:

BLOM standard set-up output
'''''''''''''''''''''''''''

Monthly averaged output
^^^^^^^^^^^^^^^^^^^^^^^

| abswnd = "Absolute wind speed"    

------------------------------------------------------

| bflx = "Brine flux"    
| bfsq = "Squared buoyancy frequency"     
| bfsqlvl = "Squared buoyancy frequancy"    
| brnpd = "Brine plume depth"    
| btmstr = "Barotropic mass streamfunction"    

----------------------------------------------------------------

| depth_bnds
| difdia = "Diapycnal diffusivity"
| difdialvl = "Diapycnal diffusivity"
| difint = "Layer interface diffusivity"
| difintlvl = "Layer interface diffusivity"
| difiso = "Isopycnal diffusivity"
| difisolvl = "Isopycnal diffusivity"
| dp = "Layer pressure thickness"
| dp_trc = "Layer pressure thickness"
| dz = "Layer thickness"
| dzlvl = "Layer thickness"

----------------------------------------------------------

| eva = "Evaporation"

-------------------------------------------------------------

| fice = "Ice concentration"
| fmltfz = "Fresh water flux due to melting/freezing"

---------------------------------------------------------------

| gls_psi = "GLS_PSI"
| gls_psilvl = "Generic length scale"

---------------------------------------------------------

| hflx = "Heat flux received by ocean"
| hmltfz = "Heat flux due to melting/freezing"

----------------------------------------------------------------

| idkedt = "Mixed layer inertial kinetic energy tendency per unit area"
| idlage = "Ideal age"
| idlagelvl = "Ideal age"
| lip = "Liquid precipitation"

----------------------------------------------------------

| massgs = "Sea water mass"
| maxmld = "Maximum mixed layer depth"
| 
| mhfld = "Meridional heat flux due to lateral diffusion"
| mhflx = "Meridional heat flux"
| mhftd = "Meridional heat flux due to thickness diffusion"
| 
| mld = "Mixed layer depth"
| mlts = "Mixed layer thickness defined by sigma t"
| mltsmn = "Minimum mixed layer thickness defined by sigma t"
| mltsmx = "Maximum mixed layer thickness defined by sigma t"
| mltssq = "Maximum mixed layer thickness squared defined by sigma t"
| 
| mmflxd = "Overturning stream-function on z-levels"
| mmflxl = "Overturning stream-function on isopycnic layers"
| mmftdd = "Overturning stream-function due to thickness diffusion on z-levels"
| mmftdl = "Overturning stream-function due to thickness diffusion on isopycnic layers"
| 
| msfld = "Meridional salt flux due to lateral diffusion"
| msflx = "Meridional salt flux"
| msftd = "Meridional salt flux due to thickness diffusion"
| 
| mtkebf = "Mixed layer turbulent kinetic energy tendency per unit area related to buoyancy forcing"
| mtkeke = "Mixed layer turbulent kinetic energy tendency per unit area related to kinetic energy change"
| mtkeni = "Mixed layer turbulent kinetic energy tendency per unit area related to near inertial motions"
| mtkepe = "Mixed layer turbulent kinetic energy tendency per unit area related to potential energy change"
| mtkers = "Mixed layer turbulent kinetic energy tendency per unit area related to eddy restratification"
| mtkeus = "Mixed layer turbulent kinetic energy tendency per unit area related to friction velocity"
| 
| mty = "Wind stress y-component"
| mxlu = "Mixed layer velocity x-component"
| mxlv = "Mixed layer velocity y-component"

------------------------------------------------------

| nsf = "Non-solar heat flux"

------------------------------------------------------------------------------

| pbot = "Bottom pressure"
| psrf = "Surface pressure"
| pv = "Potential vorticity"
| pvlvl = "Potential vorticity"

--------------------------------------------------------------

| rfi = "Frozen runoff"
| rnf = "Liquid runoff"

--------------------------------------------------------------------------

| saln = "Salinity"
| salnga = "Global average salinity"
| salnlvl = "Salinity"
| sbot = "Bottom salinity"
| sealv = "Sea level"
| sfl = "Salt flux"
| sflx = "Salt flux received by ocean"
| sigmx = "Mixed layer density"
| slvsq = "Sea level squared"
| sop = "Solid precipitation"
| sss = "Ocean surface salinity"
| sssga = "Global average sea surface salinity"
| ssssq = "Ocean surface salinity squared"
| sst = "Ocean surface temperature"
| sstga = "Global average sea surface temperature"
| sstsq = "Ocean surface temperature squared"
| swa = "Short-wave heat flux"

---------------------------------------------------------

| t20d = "20C isoterm depth"
| taux = "Momentum flux received by ocean x-component"
| tauy = "Momentum flux received by ocean y-component"
| tbot = "Bottom temperature"
| temp = "Temperature"
| tempga = "Global average temperature"
| templvl = "Temperature"
| tke = "TKE"
| tkelvl = "Turbulent Kinetic Energy"

------------------------------------------------------------

| ubaro = "Barotropic velocity x-component"
| uflx = "Mass flux in x-direction"
| uflxlvl = "Mass flux in x-direction"
| uhflx = "Heat flux in x-direction"
| uhflxlvl = "Heat flux in x-direction"
| usflx = "Salt flux in x-direction"
| usflxlvl = "Salt flux in x-direction"
| ustar = "Friction velocity"
| ustar3 = "Friction velocity cubed"
| uvel = "Velocity x-component"
| uvellvl = "Velocity x-component"

----------------------------------------------------------------

| vbaro = "Barotropic velocity y-component"
| vflx = "Mass flux in y-direction"
| vflxlvl = "Mass flux in y-direction"
| vhflld = "Heat flux due to lateral diffusion in y-direction"
| vhfltd = "Heat flux due to thickness diffusion in y-direction"
| vhflx = "Heat flux in y-direction"
| vhflxlvl = "Heat flux in y-direction"
| vmfltd = "Mass flux due to thickness diffusion in y-direction"
| volgs = "Sea water volume"
| voltr = "Section transports"
| vsflld = "Salt flux due to lateral diffusion in y-direction"
| vsfltd = "Salt flux due to thickness diffusion in y-direction"
| vsflx = "Salt flux in y-direction"
| vsflxlvl = "Salt flux in y-direction"
| vvel = "Velocity y-component"
| vvellvl = "Velocity y-component"

---------------------------------------------------------

| wflx = "Vertical mass flux"
| wflx2 = "Vertical mass flux squared"
| wflx2lvl = "Vertical mass flux squared"
| wflxlvl = "Vertical mass flux"

------------------------------------------------------------------

| ztx = "Wind stress x-component"

----------------------------------------------------


Daily averaged output
^^^^^^^^^^^^^^^^^^^^^^

| depth_bnds  

-------------------------------------

| maxmld = "Maximum mixed layer depth"    
| mlts = "Mixed layer thickness defined by sigma t"    

-----------------------------------------

| sealv = "Sea level"    
| sss = "Ocean surface salinity"    
| ssssq = "Ocean surface salinity squared"     
| sst = "Ocean surface temperature"   
| sstsq = "Ocean surface temperature squared"   

---------------------------------------

| t20d = "20C isoterm depth"